LK Shunt Cabinet VS2 Prefab comes supplied as a complete unit with LK Manifold Shunt VS2 and LK Manifold RF already fitted, including couplings for connection of heating pipes dim. 16.
Note: The cabinet is designed for right-hand side installation, i.e. the connection to the shunt unit is made from the right of the cabinet, via the cabinet base.
The cabinet has a dense base with rubber pipe grommets. The cabinet base is provided with a drainage opening which allows any water leakage to be drained to a location which can be inspected.
The cabinet is designed for installation built into a wall or surface-mounted on a wall. When building in the cabinet, the minimum stud thickness is 95 mm.
The cabinet must be supplemented with a frame/hatch. There are two types of frame/hatch, depending on whether the cabinet is built into or surface-mounted on an inner wall.
When surface-mounted, the cabinet must also be supplemented with a base in order to conceal pipes between the cabinet and the floor.
The cabinet comes supplied with pipe grommets, a bellow sleeve for drainage, a 1.5-metre conduit for drainage, drainage elbow with outlet plate, cable grommets for room control, spray guard and installation instructions.
The back of the cabinet is provided with four prefitted M8 nuts which can be used for attachment to the LK Cabinet Stand when the cabinet has to be installed before a concrete base is cast.
The top of the cabinet has knockout holes for any cable grommets for room control.
No. of circuits you can choose between would be 2,3,4,5,6,7,8,9,10,11,12. Prices are different on these items.